Lanberg © 2015-2022
1
A.
SAFETY INSTRUCTIONS
1. The device should be used in well–ventilated rooms.
2. Protect the recorder against contact with dust and moisture.
3. Use a dedicated power source. Use of an unsuitable power source can damage the equipment.
4. The device should be cleaned of dust on a regular basis.
5. Never open the recorder casing while the device is connected to the power supply.
6. Do not repair faults yourself, always contact an authorized service center or technical support to do so.
7. The recorder and cameras included in the set are especially vulnerable to damage caused by overvoltages caused by e.g.
lightning discharges, so they should be protected with additional surge protectors.
8. All tests and repairs should be performed by qualified personnel. The manufacturer is not responsible for any damage
caused by unauthorized modifications or repairs.
NOTE: THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES TO THE PARAMETERS OF THE EQUIPMENT AND THE METHOD
OF OPERATION WITHOUT PRIOR NOTICE. DUE TO THE CONTINUOUS IMPROVEMENT OF THE CURRENT SYSTEM AS WELL AS THE
SYSTEM CONFIGURATION, SOME FEATURES DESCRIBED IN THE FOLLOWING MANUAL MAY SLIGHTLY DIFFER FROM REALITY.
B.
CONTENTS OF THE PACKAGE
Each monitoring set includes:
1. POE recorder.
2. Bag with 4 screws for HDD mounting.
3. Power supply for the recorder (DC 48V / 2A).
4. Instruction manual.
NOTE: HARD DISK DRIVE NOT INCLUDED
C.
ITEM DESCRIPTION
1.
Recorder
Front:
1. Power LED
2. HDD operation LED
3. USB port.
Rear
1. POE ports
2. LAN port
3. VGA port
4. HDMI port
5. USB ports
6. Power connector.
2.
Cameras
1. Lens
2. IR LEDs
3. Camera base
4. Mounting screw holes
5. Power connector
6. RJ45 connector.
1
2
3
4
3
3
5
6
AUDIO OUT
VGA
USB
WAN
LAN8
LAN6
LAN4
LAN2
LAN7
LAN5
LAN3
LAN1
HDMI
POWER
1
2
3
4
5
6
3
1 2
ITEM NAME
QUANTITY
8–CHANNEL PCS-0804-0050
POE camera
4 pieces
Mounting kit for cameras
4 pieces
Patch cable 18 m
4 pieces
Depending on the model, the set also includes:
EN
EN
