Quick Installation Guide
Wi-Fi USB network adapters
PL
| EN
E-mail: [email protected]
www.lanberg.pl
Lanberg © 2015-2019
12
|
13
After restarting the computer, the last message regarding device searching and its installation on Windows
operating system, may re-appear. Wait until this window disappears and then proceed to the next step.
After the device and its drivers have been installed, in case of Windows OS, on the right side of the taskbar
(notification area) the following icon should appear: a computer with crossed out green signal lines (XP) / 2
overlapped screens that are crossed out (Vista) / crossed out, blanked signal bars.
NOTE
: If the device is not visible in the lower right menu bar, in the case of Windows, uninstall the drivers
from the operating system (via "
Add or Remove Programs
" [XP] or "
Programs and Features
" [Vista, 7, 8,
8.1, 10] in "
Control Panel
") and perform steps 2.1, 2.2 again. If the problem persists, please delete the
current drivers and download them directly from the website of chipset manufacturer (e.g. Realtek). Do
not install any other drivers, which are not dedicated to the chipset model, installed inside of the Wi-Fi USB
network adapter.