Lanaform LA120701, Instruction Manual

Page: 5 / 32

Digital Thermo-Hygrometer EN Instruction manual 5 / 32
EN FR NL DE PL CS SK SL
Do not recharge the batteries!
Do not short-circuit them!
Do not throw them on the fire!
Explosion hazard!
DESCRIPTION OF
THE DEVICE
INDOOR CLIMATE CONTROL
• Indoor temperatures from -10°C to
+50°C (14°F - 122°F)
• Relative humidity from 20% to 90%
• Displays the time
• Dual mode time display (12 hrs/24 hrs)
• Daily alarm (wake-up) function
• Comfort zones in the form of “smiling
emoticons”:
· appears if the indoor tempera-
ture is between 18°C and 25°C (64°F to
77°F) and humidity is between 40%
HR and 65% HR.
· appears if room temperatures
and humidity are different.
• Retractable stand.
• Built-in magnet for attaching to metal.
INSTALLATION AND BATTERY
REPLACEMENT, 1, 3
A 1.5 V (LR44) battery is included in
the device.
1 Open the battery compart-
ment and place the battery
in its compartment.
2 Replace the cover.
3 The device then indicates the
temperature and relative humidity.
If an abnormal indication is displayed
on the screen, remove the battery and
wait 2 seconds before replacing it. The
display returns to normal.
If the display problem persists, replace
the battery. In this case, make sure the
polarity matches when replacing it.
INSTRUCTIONS FOR USE
DISPLAY THE TIME
1 Press
MODE
for 2 seconds.
2 Select the 12 hr/24 hr
mode by pressing
SET
3 Press
MODE
once to con-
firm this selection.
4 Adjust the time and minutes using
the
SET
button, press
MODE
after each selection and to return
to the normal time display.
MAX AND MIN TEMPERATURE
DISPLAY AT ANY TIME
The and symbols appear
alongside the when you press
the
MAX / MIN
button and show the
maximum and minimum temperatures
as well as the time at which they were
detected.
The time is displayed again normally
after 15 seconds.
Digital Thermo Hygrometer - LA120701 - 001 - 2017 - Notice - K - 150x100 - 1.0.indd 5 14/06/2017 08:44:51