background image

III

Table of Contents

Using This Guide

Purpose of Guide ....................................................................IV
Who Should Use this Guide ...................................................IV
If You need Help ...................................................................... V

1. Introduction

Functions and Features........................................................ 1-1
LED indicators and functions .............................................. 1-2

2. Installation and Connection

Verifying Contents of Package ............................................. 2-1
Technical Considerations ..................................................... 2-2
Powering Up the Injector ...................................................... 2-3
Typical Installation of PoE Injector ...................................... 2-4

3. Troubleshooting

Checklist ................................................................................ 3-1

4. Hardware Specifications

Regulatory Compliance Standards ...................................... 4-1
Safety Approvals ................................................................... 4-1
Physical / Environmental Specifications ............................. 4-2
Electrical Specifications and Properties ............................. 4-3

Summary of Contents for LP2521




















Reviews: