8
Fault
Analysis/Trouble-shooting
81
8.2.11 Analogue outputs configuration error
Analogue outputs are parameterised that cannot physically be found. Check
parameters 539, 549, 559, 569 and 530, 540, 550,560 and compare with the inserted
cards. If necessary, replace analogue output cards and/or the processor board.
8.2.12 Service warning 1 / service warning 2
The service warning draws attention to the need for regular servicing. The user can
define service warnings as required, e.g.
Service warning 1
→
check probe
Service warning 2
→
replace probe
The appropriate cycle times can be configured as desired by means of parameters
1260 and 1261.