5
2
General Safety Instructions
2
General Safety Instructions
Observe the instructions!
Proceed only according to the instructions present here DLT7106-17-aEN-005.
Use the device only for its described purpose!
Only trained staff may operate this device.
The device may be operated and maintained only by those who are capable of doing so in
terms of their level of knowledge and training.
Observe the safety regulations of the burner manufacturer.
Electrical coupling with devices that are not mentioned in these instructions - only after con-
sulting with the manufacturers or with an "authority on the subject."
The liability for the function of the device lies with the owner or operator.
In all cases, the liability for the function of the device lies with the owner or operator, provided
the device is being improperly operated, maintained or serviced by persons who do not have
sufficient knowledge or if the device has been handled in a manner that is not compliant with
its intended use.
The design test certificate shall expire if modifications are made to devices that have a design
test certificate. Inputs and outputs of the device and the associated modules may only be in-
terconnected according to the specifications shown in these instructions.
LAMTEC GmbH & Co. KG shall not be responsible for damages which have been caused by
the non-compliance with the above-mentioned instructions. The warranty and liability condi-
tions of LAMTEC GmbH & Co KG conditions of sale and delivery shall not be extended due
to the above information.
If reference is made to laws, directives and standards, the legal system of the Federal Repub-
lic of Germany will be taken as a basis.