23
6
Operation
6.4
Load Controller Display
(only if the integrated burner firing-rate controller in FMS/ETAMATIC is active)
Fig. 6-4 Load controller display
Fields 7 to 9 are only visible if the control by atmospheric condition is activated.
1
Return to the main menu
2
Refresh display
3
Current actual value
4
Switch-on point:
Actual value below this point
firing-rate controller starts.
5
Shut-down Point:
Actual value above this point
burner runs in base firing-rate.
6
Switch-off point:
Actual value above this point
burner shuts down.
7
Max. setpoint value
8
Current setpoint value, dependent on the input signal of control by atmospheric con-
dition
9
Min. setpoint value
