4
1 General Information
The Safety Manual is valid from device version
HW 2.0, 2.1, 2.2
for the following models:
NOTICE
Because of different sensor materials, there are different ambient temperature ranges of the
models defined. The standard operating temperature range is -40 °C to +75 °C. See chapter
Appendix
7.2 Hints and requirements for installation, commissioning, operation and verifica-
defines, which models are divergent.
WARNING!
Neglecting the temperature range as defined in Appendix see chapter
ments for installation, commissioning, operation and verification
leads to a loss of the safety
integrity and may cause personnel and material damage.
1.2
Standards and Directives
The basis of test for this device are the following standards and directives:
•
DIN EN 298: 2012-11
•
DIN EN 13611: 2011-12
•
DIN EN 60730-2-5: 2015-10
•
DIN EN 60730-1: 2012-10
Technical requirements of DIN EN 61508-2:2011-02
•
2014/35/EU Low Voltage Directive (LVD)
•
2014/30/EU Electromagnetic Compatibility (EMC) Directive
•
2014/68/EU Pressure Equipment Directive Cat.4 Mod. B+D
•
EU/2016/426 Gas Appliance Directive
Summary of Contents for F200K2 IR-1
