19
4
Design and Functions
4.5
Control Elements
Configuring the device via configuration switches
There are 8 DIP switches inside the F130l for making parameter settings to the device.
WARNING!
Observe the safety instructions when working on the housing.
Fig. 4-2 Opening the housing
NOTICE
To open the housing, first remove all connectors. Then using a flat, pointed object (e.g.
screwdriver) carefully pry off the upper cover of the housing (see figure).
WARNING!
When opening the housing there is direct access to dangerous parts.
Opening the device is permitted only with all-pole disconnection
When closing, make sure the cover is seated flush with the housing and that all detent
points firmly fixed. If the cover is not mounted properly, it can have a negative influence on
the mechanical and electrical properties of the product.
Summary of Contents for F130I
Page 2: ......
Page 43: ...42 11 Appendix 11 4 Declaration of Conformity...
Page 44: ...43 11 Appendix...
