Lamtec ETAMATIC OEM, Quick Reference

Page: 6 / 24

5
3 Brief Description
3 Brief Description
ETAMATIC OEM/ETAMATIC S OEM is a control system for combustion plants. Depending on
the reference variable, the ETAMATIC OEM adjusts up to 4 actuators according to freely pro
-
grammable curves.
The ETAMATIC OEM hat 4 three point step output.
ETAMATIC S OEM has 3 three point step continuous output and a 0/4-20 mA output.
The ETAMATIC OEM has a 25 pin D-SUB-socket with a serial interface for remote control or
remote display via PC (windows Software seperately available). Connections for PROFIBUS-
DP, TCP/IP (MODBUS TCP), Interbus-S and Modbus RTUare optionally available. Other BUS
systems available on request. The connection to further plant components such as fault indi
-
cator systems or O2 trim occurs by LAMTEC SYSTEM BUS interface on a 9 pin D-SUB-sock
-
et.
The operation occurs through the optionally available PC software or operating unit. For dis
-
play to end customers, connect to customer interface via LAMTEC SYSTEM BUS. The oper
-
ation via PC software is written in a seperate manual.
3.1 Life Cycle
The device has a designed lifetime
*
of 250,000 burner start-up cycles, which, under normal
operating conditions in heating mode, correspond to approx. 10 years of usage (starting from
the production date given on the type plate).
This lifetime is based on the endurance tests specified in standard EN230/EN298 and the ta
-
ble containing the relevant test documentation as published by the European Association of
Component Manufacturers (Afecor) (www.afecor.org).
The designed lifetime is based on use of the device according to the manufacturer’s basic doc
-
umentation. After reaching designed lifetime in terms of number of burner start-up cycles, or
the respective time of usage, the device must be replaced by authorized personnel.
*
The designed lifetime is not the warranty time specified in the Terms of Delivery