Lamtec 662R2121, Operatoring Instructions

Page: 9 / 48

Sicherheitshinweise für
die Montage Safety References for the
Assembly
indications de sécurité
d'assemblages
Kap. 2
Safety References for the Assembly
Depending upon that, at which time and under which site conditions
you install the control drive, special safety aspects are to consider.
•
The assembly and start-up of the drive may take place only via
qualified specialists, who have both founded mechanical and
electrical knowledge!·
WARNING
Before an assembly or a repair of a control drive all equipment/
machine/plants concerned are to be switched off and if necessary
to be separated from the mains supplement
WARNING
Before switching off device/machine/plants, it is to be examined
compellingly whether switching off cannot exhibit danger
moments. In particular this applies in particular to proceed-
technical plants!
·
•
Disconnections are only after previous consultation with the
operating manager, shift leaders or safety engineer to accomplish!
•
Disturbances are immediate to announce the operating manager,
shift leader or safety engineer for danger warning!·
•
Convince, that pneumatic or hydraulic equipment/machine/plants
before the assembly and/or repair are pressure-free or arrange this.
If this should not be possible for different reasons, meet safety
precautions, which provided damage for humans, environment and
equipment/machine/plants!
•
Secure it your working place and guarantee it, that the
equipment/machine/plants, on which you work, can’t be taken
unintentionally starting!·
•
When assembling or repair of a control drive, in each case the
applicable safety rules for the prevention of accidents of the
professional association are to be considered!·
•
Convince yourselves before the assembly/repair over correct
function of the safety devices!