Indicator convert flashing
blue to flashing green or
always green.
Left Joystick
Ascend
Descend
Left Rotation
Right Rotation
Right Joystick
Forward
Backward
Right
Left
09:5 9
WLAN
Drone
- xxxxxx
CHOOSE A NETWORK...
14
15
DF805B
Operation Manual
DF805B
Operation Manual
3) Self-inspection and paired with RC
After power on the aircraft,ensure that aircraft is positioned on flat ground more than 30seconds to make the aircraft complete self-
inspection,when indicator convert flashing blue to flashing green or always green,which means paired with RC complete
2. Connect APP
1) The state of the GPS signal indicator after APP is connected to the aircraft.
When the APP is connected to the aircraft,if the indicator of aircraft is green always on,which means GPS is located
successfully,change flight mode to GPS mode,then aircraft can take off safely.
When the APP is connected to the aircraft,if the indicator of aircraft is green flashing,which means GPS signal is weak,or not at
all,change flight mode to Altitude mode,then aircraft can take off(Altitude mode is difficult to operate, and is not recommended for
beginners)
Notice:It is recommended that the flight start after the indicator of aircraft is the green always on (when the
GPS signal is
good).
Please choose an open and unobstructed environment. Tall steel structures and metal materials will
interfere with the compass and GPS on the aircraft.
2) Connect APP
In the mobile phone with APP installed,click WLAN setting,
choose
”
Drone-xxxxxx
”
,and connected
Open APP,enter the main interface shown in the left image below,Click on the "start flight" on the interface to enter the right picture
as shown below:
Notice:Only support 5G Hz WiFi mobile phone can connect the aircraft.
APP can monitor the picture and the current state of the aircraft in real time.
When remote controller and mobile phone APP control the aircraft at the same time, the priority control is
remote controller,meanwhile,some of the functions on the app can not be used ( take pictures,record
video,follow me,way point functions are still available),APP can only operate the aircraft without a remote
controller. Please refer to the section "Flying by APP" in the following manual.
3. Operate the aircraft
1) Take off
○
Method 1: take off manually
When aircraft is on standby state,please initiate aircraft as
shown:Dial left and right joystick outward as pictures show at
same time,and keep up more than 3 seconds,the propeller
begins to rotate.
Upward throttle joystick to let aircraft off ground fast,then keep upward throttle joystick slowly to let aircraft rise slowly.
○
Method 2: one key take off
Long press "Take off / Land" button 2-3 seconds, There is "B-B-B" sound, meanwhile, the aircraft will automatically take off,and rise
up to 1.2m.
2) Land
Before landing, pay attention to the landing site, stay away from the crowd and obstacles, choose a relatively flat ground as the
landing site,meanwhile, let the aircraft hover to control.
○
Method 1: land manually
Slowly downward throttle joystick,aircraft will slowly land, when aircraft hit the ground, keep downward the throttle joystick until the
propeller stops.
○
Method 2:one key land
Long press "Take off / Land" button 2-3 seconds, there is
“
B-B-B
”
sound meanwhile, the aircraft will automatically landing until
propeller stops.
3) Remote controller joystick instruction
(1) Mode 2
Summary of Contents for DF805B
Page 15: ......
