BOX 422 • TOWER, MN 55790 • USA • Tel (218) 753-2330 • www.lamppakuuma.com
15
Figure 26
PLENUM HIGH LIMIT CONTROL
LOW LIMIT
CONTROL
FILTER
RACK
PROCESSOR
PANEL
TC
CLE
ANO
UT C
OVE
R
FAN BOX
JUNCTION
BOX
MOTORIZED ELECTRONIC
DRAFT CONTROL
TRANSFORMER RELAY
COVER
MAIN FURNACE
FIRE DOOR
ASH DOOR
1. Use 24 ga. stove pipe and adjustable elbows.
2. Angle your stove pipes upward towards the
chimney smoke exit hole.
3. Install barometric damper provided. Set to .03 to
.06 WC.
4. Avoid using 90 degree pipe bends unless it’s
one 90 degree and then straight up.
5. Use sheet metal screw to attach all the pipes
with at least three screws evenly spaced around
the pipe and any joint.
6. Check and inspect pipes periodically for
corrosion or any other defects.
SAFETY SHOULD ALWAYS BE NUMBER ONE
INSTRUCTIONS ON CONNECTING THE 6” STOVE PIPE
