7
4-3 DESCRIPTION OF OPERATING COMPONENTS (REVERSE SIDE)
(Figure 2)
(14) MAINS POWER SWITCH
(15) RECEPTACLE
For connecting the power cable
(16) CONNECTION SOCKET FOR WELDING SHIELD („Shutter / Welding Shield“)
(17) CONNECTION SOCKET FOR FOOT SWITCH (optional extra) („Foot Switch“)
(18) CONNECTION SOCKET FOR MICROSCOPE LIGHTING („LED-Lamp 800 mA“)
(19) INERT GAS CONNECTOR
For a
∅
6,0 mm pressure hose
(20) IDENTIFICATION PLATE
(21) SERIAL NUMBER
(22) FUSE BOX
4-4 STARTING THE WELDING PROCESS:
Setting up:
The device must be set up on a flat and stable surface, a work table is best suitable.
Insert the hand piece connector as straight as possible into the socket (7) and by turning
to the right carefully bolt on (hand-tight)
Insert the connector of the clamp or pliers into one of the sockets (8)