7
4-3 DESCRIPTION OF OPERATING COMPONENTS BACK SIDE
(Figure 2)
(14) MAINS POWER SWITCH
(15) RECEPTACLE
For connecting the power cable
(16) CONNECTION SOCKET FOR WELDING SHIELD
To control eye protection of the welding safety shield
(17) Connection for optional accessories
(only "PUK 3 professional plus")
(18) CONNECTION SOCKET FOR MICROSCOPE LIGHTING 12V / 2A
(19) INERT GAS CONNECTOR
For a Æ 6,0 mm pressure hose
(20) Identification Plate
(21) FUSE BOX
Fuse box with space for spare fuses
4-4 STARTING THE WELDING PROCESS:
Setting up:
The device must be set up on a flat and stable surface, a work table is best suitable.
Insert the hand piece connector as straight as possible into the socket (7) and by turn to
the right carefully bolt on (do it manually!)
Insert the connector of the clamp or pliers into one of the sockets(8)
