LaMotte 3587, Instruction Manual

Page: 10 / 20

10
until the battery is fully charged. When the battery is completely
charged, the charging icon will change to the full battery icon.
SETTINGS
Tap to enter the SETTINGS menu. Tap to return to the test screen at any time.
Brightness
The brightness level of the display can be adjusted from 00 to 10. Tap
and
to adjust the brightness. Tap to exit to the Settings menu.
Date/Time
The Year, Month, Day, Format, Hour, Minute, AM/PM can be set. Tap or
to adjust the displayed value. Tap to move to the next value. After
the last value has been chosen (minutes for 24 hour format, AM/PM for
12 hour format) tap
to return to the Settings menu. Tap to exit to
the Settings menu at any time.
Set
Language There are ten language options – English, French, Spanish, German,
Dutch, Swedish, Portuguese, Italian, Turkish, Chinese. Tap selection. Tap
to exit to the Settings menu.
Calibration Tap to run an angle calibration to evaluate the alignment of the hub and
disk. Tap
to exit to the Settings menu.
Power
Options There are three power options: Auto Dim Time, Auto Off Time, and Power.
Tap the options then tap a selection. Tap selection. Tap
to exit to the
Settings menu.
Bluetooth
There are two Bluetooth options: Bluetooth Enabled and Fast Printer
Connect that are used to print test results. Tap
to exit to the Settings
menu.
Other
Settings About… lists the Serial Number, Firmware Version, Bluetooth MAC address,
Bluetooth Version and Test Count. The Test Count shows the number of
complete tests that have been performed over the lifetime of the meter.
Tap
to return to the Settings menu.
Ranges Enabled allows the option of having test results that are out of the
range of the reagent system displayed in red. The default setting is on.
Select Disk Detection to display an error message and abort the test when
improper testing conditions, such as No Disk, No Disk Cover, Used Disk or
Meter Check Disk, are present that would result in inaccurate or no test
results. The default setting is OFF. Tap
to return to the Settings menu.
GENERAL OPERA
TING PROCEDURES