15
Instructions and Installation
Connecting the
power cable
1. This product must only be
connected by a suitably
qualified person to a suitable
double-pole control unit with a
minimum contact clearance of
3 mm in all poles. This control unit
must be installed accordance
with the IEE regulation. Failure to
obey this instruction may cause
operational problems and
invalidate the product warranty.
Additional protection by a
residual current circuit breaker
is recommended.
If a cable is supplied with
the product:
2.
For single-phase connection,
connect the wires as
identified below:
•
BROWN
/ BLACK
cable
=
L
(Phase)
•
BLUE
/
GREY
cable
=
N
(Neutral)
•
GREEN
/
YELLOW
cable
= (E) (Ground)
›› Or
•
GREY
/ BLACK
cable
=
L
(Phase)
•
BLUE
/
BROWN
cable
=
N
(Neutral)
•
GREEN
/
YELLOW
cable
= (E) (Ground)
Installing the product
Final check
1. Plug in the power cable and
switch on the electrical fuse of
the home.
2. Check to see if the product is
operational or not.
BROWN
(Phase)
GREEN
/
YELLOW
(Ground)
BLUE
(Neutral)
Supply
cord
Terminal
block
