8
l
Measure, mark and drill upper
hinge hole in frontal (387.5 mm
from Howdens
©
lower pre-drilled
hole centre position).
It is possible to mount the hinges
and closure magnet on the right
or left-hand side depending on
your requirements. Mark the
screw hole positions, then drill
out these positions.
l
Fix the hinges in place with the
4 screws provided
(A)
.
l
Mount the plate
(D)
on the right
or left-hand side, depending on
your installation requirements.
Place the plastic support
(E)
under the plate and fix it in
position with screw
(F)
.
Note: DX = Right
SX = Left
l
Fix the magnet
(B)
in place
using screw
(C)
.
Stand the machine on a solid
board secured to the floor
(c.9-15mm thick)
A
B C
B C
D
E
F
D
E
F
2
Instructions for mounting the
furniture door
