18
l
If you want to carry out a cold wash all
the indicators must be off.
l
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
l
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
l
To alter the spin cycle press the button
until you reach the spin speed you would
like to set.
l
It is possible to modify the spin speed
without pausing the machine.
l
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increases the water level during rinsing
and keeps the laundry immersed in water
after the final rinse.
l
During the phase in which the water is
held in the tub, the relevant indicator light
blinks to show that the machine is at a
standstill.
l
Deselect the option to end the cycle with
a spin dry (which may be reduced or
cancelled using the appropriate button).
l
Thanks to electronic control, the water in
the intermediate phases is emptied
silently, making this option very useful for
washing at night.
l
Pressing simultaneously the buttons
TEMPERATURE SELECTION
and
SPIN
SELECTION
for about
3 seconds
, the
machine allows you to lock the keys. In
this way, you can avoid making
accidental or unwanted changes if a
button on the display is pressed during a
cycle.
l
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
The display’s indicator system allows you to
be constantly informed about the status of
the machine.
1
6
3
2
4 8
7
5
6
1) DOOR LOCKED INDICATOR LIGHT
l
The indicator light is illuminated when the
door is fully closed.
SPIN SELECTION button
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
The machine is fitted with a special
electronic device, which prevents the
spin cycle should the load be
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
NIGHT & DAY button
KEY LOCK/CHILD LOCK
Digital Display
