08_
LAMONA
Appliances
Before installation
The product should only be installed by suitably
competent person.
The product must be installed in accordance
with all local regulations.
Prior to installation, visually check the product
for any damage/defects. Do not install if any issues
are found.
Damaged products may cause risks to your own
safety.
Let the appliance stand upright for
approximately 24 hours before connecting it to
the power source. This helps to reduce the
possibility of a cooling-system malfunction from
handling during transportation.
The appliance is intended for installation in
Howdens kitchen cabinets.
Kitchen cabinets must be set level and fixed.
06 - Installation
The following installation drawings are
representational and may not
match exactly with your appliance.
Integrated Installation
When integrating your Drinks Cooler into a fitted
kitchen sufficient space is required to allow the
Drinks Cooler to be fully ventilated and for the door
to be opened fully . The appliance may need to be
positioned off centre to overcome any door collision
issues.
Ensure your cabinet aperture meets the
minimum dimensions listed below.
CABINET OPENING DIMENSIONS
mm (Minimum)
Height
870
Width
160
Depth
525
305mm
300mm
870 - 890 mm
525mm
570mm (inc handle )
>875mm
160mm
150mm
870 - 890mm
525mm
570mm (inc handle )
>875mm
Installation
