_ 09
User manual LAM6901
Installing the Handle
Gently pull the door gasket to one side to reveal the
two designated holes for handle installation.
Install the handle tightly as shown below with the
two screws, and washers provided.
3
2
1
4
5
7
3
2
8
Reversing the Door Swing
This Drinks Cooler door can open from either the
left or right-hand side. The unit is delivered with the
door opening from the left-hand side. Should you
wish to reverse the door swing, please follow the
reversal instructions below.
All parts removed must be saved to reinstall
the door
Open the glass door and remove the two screws
(1), under the right bottom corner of the glass door,
that are used to hold the right lower hinge (2), to the
door shaft assembly (3). Be careful to support the
glass door with both hands to prevent it dropping
after removing the screws.
3
2
1
4
5
7
3
2
8
Pull down to remove the glass door and place it on a
padded surface to prevent scratching it.
Remove the right top hinge (4), and right lower
hinge (2).
3
2
1
4
5
7
3
2
8
Remove the left top hinge (7), and left lower
hinge (8) from the component bag that includes
the instruction manual then install them at the
designated positions at the left side of the cabinet
(pictured below)
3
2
1
4
5
7
3
2
8
Turn the glass door 180’ and reinstall
Installation
