10_
LAMONA
Appliances
Adjusting The Plinth Cover
•
The adjustable plinth cover is located behind
the louvered plinth, and is held in position by
two screws.
•
Loosen the two screws. Slide the adjustable
plinth down to cover the gap between the wine
cooler and the floor.
•
Retighten the screws.
3
2
1
4
5
7
3
2
8
Connection to the mains supply
Check that the voltage marked on the product
corresponds with your supply voltage.
This Appliance Must Be Earthed
The wires in the mains lead are coloured in
accordance with the following code:
GREEN / YELLOW – EARTH
BLUE – NEUTRAL
BROWN- LIVE
Earth
(Green / Yellow)
Neutral
(Blue)
Live
(Brown)
Earth
(Green / Yellow)
Neutral
(Blue)
Live
(Brown)
This appliance is fitted with a plug which has a 5
amp fuse. Should the fuse fail, then it must be
replaced with an ASTA approved fuse (conforming to
BS1362) of the same rating. If you need to replace
the plug or if the plug is incorrect for your type of
socket, remove it and replace it with an appropriate
plug. Dispose of the old plug safely.
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The
GREEN / YELLOW
wire is
the
EARTH
and must be connected to the terminal
which is marked with the letter ‘
E
‘ or by the earth
symbol
The
BLUE
wire is the
NEUTRAL
and must be
connected to the terminal which is marked with the
letter ‘
N
’ or coloured
BLACK.
The
BROWN
wire is the
LIVE
wire and must be
connected to the terminal which is marked with the
Letter ‘
L
’ or coloured
RED
.
Always ensure that the plug cord grip is fastened
correctly, if in doubt consult a qualified electrician
who will be pleased to do this for you. This product
conforms to EC Directive 92/31 /EEC with respect
to Electromagnetic Compatibility.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable
plug fitted to the mains lead, you will find that it
incorporates a fuse, the value of which is indicated
either on the base of the plug or on the fuse carrier.
Should the fuse need replacing, you must use an
ASTA approved one (conforming to BS1382) of the
same rating.
If the fuse cover is lost, the plug must not he used
until a replacement is obtained from an electrical
supplier.
If you need to remove the plug, cut it from the
mains lead and immediately dispose of it.
Never attempt to re-use this plug or insert it into a
socket outlet as there is a very great risk of an
electric shock.
Connection to the mains supply
