32
www.howdens.com
Built-in Single Pyrolytic Oven
LAM3710
Troubleshooting guide
Symptoms
Possible cause
Solutions
Oven emits steam
when it is in use.
• Food is being cooked
with a high water content.
It is normal that steam
escapes from food during
cooking. This is not a fault.
Product emits
metallic noises while
heating and cooling.
• When the oven cavity heats
up or cools down parts will
expand and contract.
This is quite normal and
the oven is designed to
accommodate such
movement (this is not a fault).
Product does not
operate.
• The mains fuse is maybe
defective or has tripped.
• Product is not
connected properly.
Check all power
connections.
Check fuses in the fuse
box. If necessary, replace
or reset them.
Oven light does
not work.
• Oven bulb is defective
Replace oven bulb.
• Power is cut.
Check if there is power.
Check the fuses in the fuse
box. If necessary, replace or
reset the fuses.
Oven does not heat.
• Function and / or
temperature are not set.
• The timer is not adjusted
correctly. Reset the oven
timer.
• Power is cut.
Set the function and the
temperature with the Function
and/or Temperature knob/key.
Check if there is power.
Check the fuses in the fuse
box. If necessary, replace or
reset the fuses.
No reaction of the
touch user interface.
• Steam and condensation on
the user interface panel
Clean with a microfibre cloth
the user interface panel to
remove the condensation.
layer
Display shows ‘
LOC
’.
• Child lock active.
See page 12.
Condensation on
door or control panel
• Expected in normal function.
Not a product fault.
No action required.
If you cannot eliminate the problem after following the instructions
in this section, consult your depot or the Authorised Service Agent.
Never try to repair a non-functional product yourself.
17. Troubleshooting
Summary of Contents for LAM3710
Page 2: ......
