Instructions and Installation
31
3. As shown in the figure, gently lift
the innermost glass
1
towards
A
and then, remove it by
pulling towards
B
.
1. Innermost glass panel.
2* Inner glass panel (It may not
exist on your product.)
4. If your product has an inner
glass
2
, repeat the same
process to detach it
2
.
5. The first step of regrouping the
door is to reassemble the inner
glass
2
. Place the bevelled
edge of the glass to meet the
bevelled edge of the plastic
slot. (If your product has an
inner glass). Inner glass
2
must
be attached to the plastic slot
closest to the innermost glass
1
.
6. While reassembling the
innermost glass
1
, pay
attention to place the printed
side of the glass on the inner
glass. It is crucial to place the
lower corners of the innermost
glass
1
to meet the lower
plastic slots.
7. Push the plastic component
towards the frame until a ‘click’
sound is heard.
Cleaning the oven lamp
In the event that the glass door
of the oven lamp in the cooking
area becomes dirty; clean
using dishwashing detergent,
warm water and a soft cloth or
sponge and dry with a dry cloth.
In case of oven lamp failure, you
can replace the oven lamp by
following the sections that follow.
Replacing the oven lamp
General warnings
• To avoid the risk of an electric
shock before replacing the
oven lamp, disconnect the
electrical connector and
wait for the oven to cool. Hot
surfaces may cause burns!
• The oven lamp is a special
electric bulb resistant to 300°C.
Oven lamps can be obtained
from Authorised Services.
• The position of the lamp may
differ from that is shown in
the figure.
• The lamp used in this product
is not suitable for use in the
lighting of home rooms. The
purpose of this lamp is to help
the user see food products.
• The lamps used in this product
must withstand extreme
physical conditions such as
temperatures above 50°C.
A
B
1
2
*
