7
Instructions and Installation
• When hot and cold air meet, condensation can form. The outer door is
air cooled and the inner glass will become hot during cooking, therefore
some condensation might form. This is perfectly normal. All condensation
will disappear as the oven reaches cooking temperature.
• Product must be installed by a qualified person in accordance with the
regulations in force. Otherwise, the guarantee may become void.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
oven door glass since they can scratch the surface, which may result in
shattering of the glass.
• Do not use a steam cleaner for cleaning operations.
•
WARNING:
Avoid possibility of an electric shock – ensure the
appliance is switched off before replacing the lamp.
• The means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
• The instructions state the type of cord to be used, taking into account
the temperature of the rear surface of the appliance.
• Do not switch the oven off at the mains isolation switch immediately
after cooking cooling fan continues to run for up to 20-30 minutes
approx. even after the oven control is turned off.
Safety for children
• Electrical products can be dangerous to children under 8 years of age.
• Keep children away from the product when it is operating and do not
allow them to play with or near the product.
• CAUTION:
accessible parts of the oven may become hot when the
oven or grill is in use. Children should be kept away until the product has
cooled down.
• Do not store any items above the appliance that children may reach for.
• When the door is open, do not load any heavy object on it and do not
allow children to sit on it. The door or door hinges may be damaged.
• The packaging materials will be dangerous for children. Keep the
packaging materials away from children. Please dispose of all parts of
the packaging according to environmental standards.
Safety when working with electricity
• Any work on electrical equipment and systems should only be carried
out by author ised or qualified persons.
• In case of any damage, switch off the product and disconnect it from
the mains. To do this, turn off at the fuse box.
• Make sure that fuse rating is compatible with the product.
