Before installation
The product should only be installed by suitably
The product must be installed in accordance
with all local regulations.
Prior to installation, visually check the product
for any damage/defects. Do not install if any issues
are found.
Damaged products may cause risks to your own
safety.
Installation
The appliance is intended for installation in
Howdens kitchen cabinets.
Surfaces, synthetic laminates and adhesives
used must be heat resistant.
If there is a drawer beneath the oven, a shelf
must be installed between oven and drawer.
The following installation drawings are
representational and may not match exactly
with your appliance.
560mm
560mm
585mm
(min)
560mm
567mm
560mm
575mm
567mm
20 mm
20 mm
570mm
min depth
570mm
min depth
*
*
*
575mm
595mm
595mm
595mm
585mm
(min)
Tower Installation
Note: Remove carcass rear panel
to assist with oven ventilation
* A minimum of 150mm² ventilation
gap is required as illustrated
(35mm x 500mm cut-out)
Built under installation
www.howdens.com
Page _ 20
LAMONA
Appliances
594mm
