_ 17
User manual LAM3301
Care and maintenance
Removal of the oven door
1.
Open the door.
2.
Unlock the clips at the hinge housing on
the right and left hand sides of the door by
pressing them down as illustrated in the
diagram.
1. Door
door
2. Hinge
3. Oven
4.
Raise the door to the half-way position.
5.
Remove the door by pulling it up-wards to slide
it from the hinges.
Steps carried out during removing process should
be performed in reverse order to reattach the door.
Do not forget to close the clips at the hinge
housing when reinstalling the door.
Replacing the oven lamp
Hot surfaces may cause burns!
Make sure that the appliance is switched off
and cooled down in order to avoid the risk of an
electrical shock or burns.
The oven lamp is a special electric lamp that
can resist up to 300°C. See Technical
for details.
Position of lamp might vary from the diagram.
1.
Disconnect the product from mains.
2.
Turn the glass cover counter clock-wise to
remove it.
3.
Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4.
Install the glass cover
