www.howdens.com
Built-in Oven
LAM3214
28
• For persistent stains, the oven
and grill cleaner recommended
on the website of your product
brand and a non-scratching
scouring pad can be used.
Do not use an external oven
cleaner.
• The oven must cool down for
cleaning in the cooking area.
Cleaning on hot surfaces shall
create both fire hazard and
damage with enamel surface.
Catalytic surfaces
• The side walls in the cooking
area can only be covered with
enamel or catalytic walls. It
varies by model.
• The catalytic walls have a light
matte and porous surface.
The catalytic walls of the oven
should not be cleaned.
• Catalytic surfaces absorb oil
thanks to its porous structure
and start to shine when the
surface is saturated with oil, in
this case it is recommended to
replace the parts.
Glass surfaces
• When cleaning glass surfaces,
do not use hard metal scrapers
and abrasive cleaning
materials. They can damage
the glass surface.
• Clean the appliance using
dishwashing detergent, warm
water and a microfibre cloth
specific for glass surfaces and
dry it with a dry microfibre cloth.
• If there is residual detergent
after cleaning, wipe it with cold
water and dry with a clean and
dry microfibre cloth. Residual
detergent residue may damage
the glass surface next time.
• Under no circumstances should
the dried-up residue on the
glass surface be cleaned off
with serrated knives, wire wool
or similar scratching tools.
• You can remove the calcium
stains (yellow stains) on the glass
surface with the commercially
available descaling agent,
with a descaling agent such as
vinegar or lemon juice.
• If the surface is heavily soiled,
apply the cleaning agent on
the stain with a sponge and
wait a long time for it to work
properly. Then clean the glass
surface with a wet cloth.
• Discolourations and stains on
the glass surface are normal
and not defects.
Plastic parts and painted surfaces
• Clean plastic parts and painted
surfaces using dishwashing
detergent, warm water and a
soft cloth or sponge and dry
them with a dry cloth.
• Do not use hard metal scrapers
and abrasive cleaners. It may
damage the surfaces.
• Ensure that the joints of the
components of the appliance
are not left as damp and with
detergent. Otherwise, corrosion
may occur on these joints.
