Page _ 13
Exclusive to Howdens Joinery.co
User manual LAM2851
Methods of Extraction
The very best method of clearing the kitchen of unwanted odours is by connecting the appliance to an
exhaust duct and venting to the outside atmosphere via the ceiling or an exterior wall. (Suitable ducting kits
may be purchased from the depot where you bought the extractor.) You do not need charcoal
when
using the external ducting mode.
Extraction Via Ducting
Never use the hood in areas where devices with
exhaust pipes connected to the outside are
already operating unless perfect ventilation can be
guaranteed.
•
Carbon filter is not required if the extractor
is to be ducted out.
Extraction Via Recirculation
For extraction via recirculation, attach carbon
filter inside the hood.
(Part reference LAM2002)
switched off.
•
•
•
•
Remove the grease filters.
•
Turn the retaining clips to release the
filter.
•
Insert new filter, turn retaining clips to
fasten.
•
Replace the grease
before the power
supply is turned back on.
•
Performance will be reduced when used in
recirculation mode, or if using long lengths
of ducting.
Installation
Do not connect the ducting system of this
appliance to any existing ventilation system
which is being used for any other purpose.
The air must not be discharged into a flue that
is used for exhausting fumes from appliances
burning gas or other fuels (not applicable to
appliances that only discharge the air back into
the
Keep ducting as short as possible, with the
minimum number of bends, for the best
airflow (max 3 metres).
room).
Connect the external ducting kit to the outlet
of the extractor.