background image

Battery

Connecting The Remote Control

The remote control requires a CR2025 battery. The battery can be accessed fromthe bottom, as shown in

the below picture.

Carefully release the tab and 

pull the battery tray out.

A new remote control has to estabish a connection to the cooker hood when used for the first time.

(One remote control could possibly control several cooker hoods at the same time).

Connection Process Between Remote Control And Cooker Hood:

1. Press any button on the LCD touch control panel on the cooker hood, the backlight display is lit and the 

cooker hood is in stand-by mode.

2. Press          for 10 seconds, the indicator lights begin flashing from one button to another:- the cooker hood

is in connection mode. The press any button on the remote control to confirm the connection. The connection

process is finished and the remote can be used for speed selection, lighting and timer setting.

3. If you want to connect again you will need to clear the code that has been

entered previously:

To clear: Press the          for 10 seconds, the indicator lights begin flashing one button to another:- the 

cookeris in connection mode. Then, press the          for 10 seconds immediately again: the previous 

connection code is cleared

To After the previous connection code is cleared. Press          for 10 seconds:- the indicator lights begin

flashing from one button to another:- the cooker hood is in connection mode. Then press any button of the

remote control to confirm connection.

Page _ 10

www.howdens.com

LAMONA

  Appliances

 

Summary of Contents for LAM2851























Reviews: