Exclusive to Howdens Joinery.co
Page _ 11
User manual LAM2505 LAM2506
Decorative chimney fitting
1. Connect the extractor to the electricity supply (see electrical connections page). We recommend an
isolation switch that is accessible after installation.
2. The outlet reducer ‘7’ maybe required depending on your ducting kit (supplied separately).
3. Fit the appropriate ducting kit if venting externally.
4. Rest the chimney sections on the main extractor body and extend the upper section to the ceiling
5. Use the extended chimney sections to mark-up the appropriate position of brackets ‘4’ and ‘5’
6. Remove the chimney sections, drill and secure
brackets with appropriate
7. Resit the chimney sections on to the extractor body, hooking the lower section on to brascket ‘5’ and
secure to the upper wall bracket using the screws ‘10’ provided.
200mm
3.
2.
1.
7.
4.
5.
