Exclusive to Howdens Joinery.co
Page _ 13
User manual LAM2410 LAM2411
If you cannot eliminate the problem after following the instructions in this section, consult your
Metal Surfaces of the Extractor and Condensation
When cooking with pans using a large water content, large quantities of vapour and steam can be produced
very quickly. This steam may condense onto the cold metallic surfaces of the extractor and even the splash
back area if tiled, glazed etc (This is not a fault with either the hob or extractor if correctly installed). The
amount of this condensation on any particular surface will depend on many factors including the ambient
temperature in the kitchen, the related ambient temperature of the metal surfaces, the general ventilation
within the kitchen, the type of food being cooked and the duration. Using lids on pans can help reduce the
amount of steam being released and subsequent condensation.
depot or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.
Troubleshooting
TECHNICAL INFORMATION
General
Total power consumption
67.5W
Fuse
3 A
Voltage /Frequency
220-240 V ~ 50 Hz
Cable type / section
0.75mm², 3 core or equivalent
Cable length
max. 1.5m
Lamps
1 x 2.5W LED warm white 3000k
TROUBLESHOOTING GUIDE
Symptoms
Possible Cause
Solutions
Lamps fail to operate?
Light functions but fan
does not
•
Lamps internal fault.
•
Power is cut (extractor will not function).
•
Lamp has passed its usable life.
•
Motor temp has exceeded and
thermal fuse has tripped.
Call the authorised service agent.
•
Switch off the extractor and allow it to cool down
and the fuse will auto reset.
•
Check the filter condition and clean or replace
as required.
Motor is on but fan does
as usual?
•
Clogged
can reduce the
product’s
Check the grease
and charcoal
(if
also
ensure any venting is not obstructed?
Clean the grease
with warm water and mild
detergent, and/or replace any charcoal
The extractor works
normally but smells linger?
•
Clogged
can reduce the
product’s
and may cause
unwanted smells.
Clean the grease
with warm water and mild
detergent, and/or replace any charcoal
Product does not operate?
•
The mains fuse maybe defective or
has tripped
Check fuses in the fuse box. If necessary, replace or
reset them.
•
Product is not connected properly.
Check all power connections.
