background image

Hob²Hood

It is an advanced automatic function which connects the hob to a special hood. Both the

hob and the hood have an infrared signal communicator. Speed of the fan is defined

automatically on basis of mode setting and temperature of the hottest cookware on the

hob. You can also operate the fan from the hob manually.

For most of the hoods the remote system is originally deactivated. Activate it

before you use the function. For more information refer to hood user manual.

Operating the function automatically

To operate the function automatically set the automatic mode to H1 – H6. The hob is

originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes

temperature of the cookware automatically and adjusts the speed of the fan.

Automatic modes

 

Automatic light

Boiling

1)

Frying

2)

Mode H0

Off

Off

Off

Mode H1

On

Off

Off

Mode H2 

3)

On

Fan speed 1

Fan speed 1

Mode H3

On

Off

Fan speed 1

Mode H4

On

Fan speed 1

Fan speed 1

Mode H5

On

Fan speed 1

Fan speed 2

Mode H6

On

Fan speed 2

Fan speed 3

1) 

The hob detects the boiling process and activates fan speed in accordance with automatic mode.

2) 

The hob detects the frying process and activates fan speed in accordance with automatic mode.

3) 

This mode activates the fan and the light and does not rely on the temperature.

14

Summary of Contents for LAM1902





























Reviews: