22_
LAMONA
Appliances
Connect to the electricity Supply
This appliance must be earthed. Only connect
to the electrical mains terminal with the power
switched off. The electrical mains terminal is live.
Follow the terminal block connection schematic.
Loose and inappropriate connections can make the
terminal overheat.
Ensure the cable clamp is fitted correctly and
securely.
A device must be provided in the electrical
installation which allows the appliance to be
disconnected from the mains at all poles with a
contact opening of at least 3mm.
We recommend that the appliance is connected
by a competent person who is a member of a
“Competent Person Scheme” who will comply with
the required local regulations.
Connection should be made with a suitable cable.
Ensure that you route all mains electrical
cables well away from any adjacent heat source,
such as an oven or grill.
Strip the wires & connect to the terminal block as
shown in the terminal block schematic.
Fit the cable clamp & secure with the screw
provided.
Close the terminal box, ensuring that the cover is
engaged on the locking tabs.
The terminal block is already adjusted to
accept the cables and unscrewing is not required.
The terminal block and clamps can be damaged by
excessive tightening or untightening, the use of
power tools for this proceedure is not
recommended.
Installation
1
2
3
4
5
6
7
1
2
3
4
5
6
Live
Live
1
2
3
4
Neutral
Earth
BROWN / L1
BLUE / N
GREEN/YELLOW / PE
230V.....240V
5
6
Cable clamp screw
Cable clamp
Terminal Block Connection
Schematic
7
Link
7
Note;
Ensure Link screw connections are tight!
