12_
LAMONA
Appliances
Place the hob in the aperture, checking the hob is
covering the worktop along all four sides. Set the
front edge of the appliance parallel with the front of
the worktop.
Secure the hob to the worktop by means of
the brackets provided, taking the thickness of
the worktop into account. Your appliance will
be supplied and installed using the following
installation method.
Method 1
The brackets screw directly into the base of the hob
in the positions shown
40mm
Hob
Worktop
Screw
50mm
Hob
Worktop
Screw
30mm
Hob
Worktop
Screw
Installation above an oven
If the appliance is installed with an oven
underneath, please leave atleast 25mm of
ventilation, umless otherwise stated in your oven
installation guidelines.
Worktop
25mm
oven or partition
Hob
5mm
Connect to the electricity Supply
This appliance must be earthed.
The hob must be installed by a competent
electrician, using a suitable double pole control unit,
with 3mm minimum contact separation at all poles.
Connection should be made with a suitable cable.
Ensure that you route all mains electrical
cables well away from any adjacent heat source,
such as the base of the hob or oven / grill surface.
Strip the wires & connect to the terminal
block as appropriate:-
L= Brown/Red
N = Blue/Black
Earth = Green/Yellow.
Fit the cable clamp & secure with the screw
provided.
Close the terminal box, ensuring that the cover is
closed and all screws in place.
Installation