background image

When the following problems occur, please contact the local seller or customer service:

 

1) When the fuse breaks

 

2) When water or other dirt get's into the machine

 

3) When the power line or plug is abnormally hot.

When you need to call the customer services

Anything Wrong?

……, Please check your machine with the following steps

(only the service person can open the side door)

ISSUES

Please check as following

The operation switch is 

“ON”,but the machine is 

not operation.

1. Is the water tank placed in the right position?
2. Is the power plug inserted right position?
3. Is the fuse broken?
4. Is the power off?

The dehumidification 

amount is too low.

1. Is the front filter net dirty?
2. Is the interior temperature and the humidity too low?
3. Is the air outlet and air inlet jammed?

Long time operation can 

not  reach  the  suitable 

humidity condition.

1. Does the door or window too widely open?
2. Is there any generated water evaporator?
3. Is the interior space too big?

When  the  machine  is 

making huge noise.

1. Is the floor flat and hard?
2. Is the dehumidifier in the right position?

The lamp is continuously 

on.

1. Is the temperature or humidify sensor is

    damaged or loosen?

TROUBLE SHOOTING

13

Summary of Contents for Saluber PD23E-20










Reviews: