27
7 MENU
Press button "3" (MENU) to access the menu.
The menu is divided into different items and levels that allow you to access board settings and
programming. Menu items that allow you to access technical programming are protected by an access key.
User menu
The following table briefly describes the structure of the menu, focusing only on selections available to the
user in this section.
To operate from the menu, follow the guidelines below:
•
Use button "3" to enter into the selected menu or sub-menu (you go down a level).
•
Use button "4" to do the reverse and exit the menu or sub-menu in which you are located (you go up a
level).
•
Use buttons "1" and "2" to modify a parameter value (temperature, time, etc.).
•
Use buttons "5" and "6" to move horizontally between different menus or sub-menus or parameters.
7.1 Menu 01 "WATER PRESSURE"
This item is only available on hydro and boiler models (firmware update Dec/2010) and allows you to
bypass pressure control when the heating stove or boiler is connected to an open vessel. Use buttons "1"
and "2" to select "on/off".
7.2 Menu 02 "CLOCK SET"
You can set the current time and date in this menu. The board is equipped with a lithium battery that allows
internal clock autonomy over 3/5 years.
Enter into MENU and set, in order:
01
day of the week
(Monday… Sunday)
02
hour
(0..23)
03
minutes
(0..59)
04
day of the month
(1..31)
05
month of the year
(1..12)
06
current year
(2000.. 2099)
7.3 Menu 03 "CHRONO SET"
Use this menu to enable and programme start-ups and shutdowns.
There are eight different possibilities divided into three groups:
Daily programme: 2 start-ups and shutdowns valid each day
Weekly programme: 4 start-ups and shutdowns, for which you can decide which days of the week they must
be active.
Weekend programme: 2 start-ups and shutdowns valid only for Saturday and Sunday.
