2
IMPORTANT INFORMATION
This manual has been prepared by the manufacturer and is an integral and essential part of the product. In
the event of sale or transfer of the product, always ensure the presence of the manual as the information it
contains is addressed to the purchaser and to all those various people involved in the use and maintenance
of the product. Carefully read the instructions and information contained in this manual before operation
and maintenance of the product. The instructions contained in this instruction manual guarantee the safety
of persons and property and ensure efficient operation and a longer service life. The manufacturer declines
all responsibility for damage caused by failure to observe instructions regarding use and maintenance listed
in the instruction manual, for unauthorised modifications or non-original replacement parts. The product
must be used in accordance with the manufacturer's instructions and in compliance with European, national
and local regulations. Maintenance and repairs are operations that must be performed by qualified and
licensed personnel who must have appropriate knowledge of the product. The product must not be used
close to walls made of wood or combustible material. Hot spot installation must be performed by at least
two people. Only operate the hot spot with regulation wood pellets (refer to the ''FUEL'' chapter). Never use
liquid fuels to operate the product and to stoke the embers present. Discontinue use of the product in the
event of failure or malfunction. Any accumulated unburned pellets in the burner as a result of repeated
failed ignitions must be removed prior to next ignition. Hot spot operation can cause the handles, chimney
flue, and glass surfaces to become very hot. Only touch these parts during operation when wearing
protective clothing or with adequate aids. Inform children of the precautions to be observed during product
operation and of possible dangers. In the event of problems or misunderstanding of the instructions
manual, contact your dealer. Placing objects which cannot withstand heat on the hot spot or within the
minimum required safety range is prohibited. Do not open the door during operation or operate the hot spot
with its glass broken. For product terms, limitations and exclusions, please refer to the warranty included
with the product. In order to pursue a policy of constant product development and renewal, the
manufacturer may make changes to it as deems appropriate without notice. This document is the property
of the manufacturer and cannot be disclosed in whole or in part to any third party without the written
consent of the company, which reserves all rights according to the law.
GUIDELINES AND STANDARDS
All our products are manufactured according to
the following guidelines:
89/366 EEC
89/106 EEC
