Change the tube colors
One of the most fun function of the Lamina Nixie Clock, that you can
change the LED lighting colors around the nixie tubes.
This function may seem complicated, but at the end it will be real fun.
There are one RGB LED light in each acrylic tank around the nixie
tubes. To see a particular color, it needs to be mixed from red, green,
and blue light. Each of these three colors have a brightness value from
0-255. Zero when the light source is OFF, 255 at full brightness. The
color mixing chart give you some basic information how to mix the
colors.
2. AM/PM LED light mode - The tubes have a set AM color from mid-
night till noon, at 12:00 the color changes to the PM color.
Day Mode/Night mode values can dim or switch the lights OFF for the
night.
The night time brightness of the lights can be set to zero to maximum.
(parameter #25)
To choose between day/night light mode and AM/PM LED light
mode go to parameter #19. Set the values to
“0” to have no lights at all,
“1” to day/night light mode,
“2” to day/night light mode with flashing effect,
“3” for AM/PM light mode,
“4” for color scan mode, when the lights change the colors
randomly.
- 11 -
The color of the nixie tube characters can not be changed!
