8
4. INSTALLATION/ASSEMBLY
4.1. NOTES ON INSTALLATION
Installation, checking, commission-
ing and troubleshooting of the de-
vice must be carried out by a qual-
ified electrician only (VDE 0100 or
similar).
DANGER!
Danger to life due to dangerous
electrical voltage (mains voltage)!
There are unprotected live compo-
nents inside the device.
• Observe the VDE regulations.
• De-energise all needed lines for the
assembly, and take safety precautions
against unintended activation.
• Do not use the device if damaged.
• Discontinue use of the device or the
system, and secure to prevent inadvert-
ent operation, if it is assumed that safe
operation is no longer guaranteed.
The device is designed for the intended use
only. Any unauthorised modification or fail-
ure to observe the instructions will void war-
ranty or guarantee claims.
After unpacking, check the device immedi-
ately for any mechanical damage. If transport
damage is present, immediately inform the
supplier.
The device may only be operated as a sta-
tionary system, that is, only in mounted con-
dition, following completion of all installation
and commissioning work, and only in the
intended environment.
Lamilux is not liable for changes in standards
after publication of the operating manual.
4.2. NOTES ON WIRELESS EQUIPMENT
When planning systems with devices that
use wireless communication methods, at-
tention must be paid to sufficient wireless
reception. The range of wireless controls
is restricted by legal regulations for radio
equipment as well as by conditions in the
building. Avoid sources of interference and
obstacles between the transmitter and re-
ceiver resulting in the disruption of wireless
communication. These include, for example:
• Walls and ceilings (especially concrete
and sun protection glazing).
• Metallic surfaces in the vicinity of the
mobile nodes (e.g., aluminium con-
struction of a conservatory).
• Other wireless devices and powerful
local transmitter systems (e.g., wireless
headphones) which transmit on the
same frequency (868.2 MHz). Keep a
minimum distance of 30 cm between
radio transmitters.
Smart Home Control • Revision: 11-05-2016. • As of version 1.7 Subject to technical modifications and errors.
