background image

8

Do not change temperature and velocity in processing of lamination 
because you can not laminate adequately by non uniform heat. 
In the worst case winding occurs.

Pressing this button reverses rotation of roller.
This function is for urgent needs for example like you are winded by rollers.

⑩ REB button

Pressing this button stops roller working.
Do not use this function for a long time 
because it causes a failure of roller to stop it for a long time in hot mode.

⑨ RUN/STOP button

Present temperature of roller is shown for a while.

⑧ MEAS button

Pressing this button long switch Sleep mode, and power is turned off automatically.
Button is nonreactive in this mode until power is turned off.
 ※If you do not use the machine for a long time, turn off the main power switch.
  When you continue operation, please wait turning off the machine automatically,
    and press power button again.

⑦ Power button

You can adjust 1 ~ 9 velocity settings.

⑥ Velocity adjustment button

You can adjust temperature 0°C ~ 140°C at 1°C increment.
Adjust adequate temperature for printed material which you want to laminate.

⑤ Temperature adjustment button

Pressing this button switch COLD mode.
When you press this button, roller heating stops and velocity is changed to 5.

④ COLD button

Attention

Summary of Contents for Lotus-13 LK



















Reviews: