Sivu 13 / 20
7.5.
Removing the back broom from the base machine
1.
Lower the back broom down on an even surface on its support legs (picture 12).
2.
Adjust the support wheels so that the bru
sh rings don’t touch the ground.
3.
Turn off the base machine, apply the parking brake and depressurize the system.
4.
Detach the hydraulic hoses and protect hose ends with plugs.
5.
Unlock the coupling mechanism and detach the device.
6.
If the equipment is not likely to be used for a longer period of time, clean it thoroughly after operating and
lubricate as instructed.
Remove water from irrigation system’s hoses. If possible, store the unit inside.
Picture 12. Properly supported back broom
7.6.
Transferring the back broom
When transferring the attachment lift the brush rings and the support legs and reduce the speed if needed, especially on
bumpy, uneven roads. Base machine or the attachment can be damaged due to excessive speed.
