-
136
-
Huracán ST - Removing/Installing the Rear Spoiler
Vehicle Introduction
® Automobili Lamborghini S.p.A.
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said
information. All copyrights are the property of Automobili Lamborghini S.p.A pursuant to copyright law. All PDF chapters comprising the WEB workshop manuals described herein are based
on information that were available at the time of publication. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to
unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili
Lamborghini S.p.A. Huracán ST
Installation
1
Position the rear wing support wing
and fasten with 5 screws.
Perform this operation on both sides
Tighten the screws
2
Insert the wing on the supporting
wings and screw in the 2 fastening
screws
Tighten the screws
Warning!
To determine the required angle,
see the Adjustment Chapter before
tightening the screws
