-
115
-
Huracán ST
– Front Suspension Assembly
Vehicle Introduction
® Automobili Lamborghini S.p.A.
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said
information. All copyrights are the property of Automobili Lamborghini S.p.A pursuant to copyright law. All PDF chapters comprising the WEB workshop manuals described herein are based
on information that were available at the time of publication. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to
unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili
Lamborghini S.p.A. Huracán ST
Replacing the Suspension Assembly
Front suspension
Pre-assembly
Procedure applies to both sides, LH and RH
Clean all threads with degreaser
1
Place the front hub housing in a vise
2
Position the hub-bearing assembly on
the hub housing.
Bring the 4 mounting screws into
position.
Install the 4 screws
Tightening torque to 80Nm +90°
