EN
Cod. 3QE46190 - Rev. 01 - 10/2020
RUBINO PLUS
19
1.7 UNITDESCRIPTION
1 - "fig. 2 -". CABINET FOR THE WALL INDOOR UNIT
The cabinet housing the wall indoor unit is entirely made of ABS
and also acts as a bearing structure.
2 - "fig. 2 -". VENTILATING UNIT
The ventilating unit of the wall unit consists of a tangential fan.
This ensures very silent running. The outdoor unit is provided with
a helical fan with large blades. the motor is DC brushless type.
3 - "fig. 2 -". HEAT EXCHANGE BANK
In both units the heat exchange bank is made of copper tubing
with aluminium sheet fins in a continuous pack. The fins are di-
rectly blocked by the mechanical expansion of the copper tube in
order to obtain a high degree of heat transmission.
4 - "fig. 2 -". FILTERING SECTION
The filtering section, located in the indoor unit, is made of synthe-
tic material with a high filtering capacity and can be regenerated
by blowing and washing it. There are also 2 additional filters (part
4A -
"fig. 2 -"), to be installed on the rear part of the main filters,
for better filtration of the treated air. The additional filters are of the
"cold catalyst" and "bio hepa" type.
5 - "fig. 2 -". REMOTE CONTROL
The air conditioners of this series are provided with an infrared
remote control, which allows the appliance to be easily operated
and all parameters controlled.
A
B
5
4
fig. 2 -
