69
GB
By doing this, access the reset request confirmation display with duration of 5s.
Pressing the key again determines the reset of the anomalies log and the return to the position 1 log display for
functioning hours.
flashing
PARAM MENU (PARAMETERS)
The PARM MENU is organised as per table
BURNER TYPE
This parameter allows to set the type of burner and manage (three-stage or modulating burner).
Press key i to access the PARAMETER VALUE MODIFICATION mode, during which the value of the parameter
displayed flashes.
In MODIFY PARAMETER VALUE mode, use the + and – keys to modify the value.
Press key i to memorise the current value displayed.To exit this mode without memorising the value, press key R
or wait 10s without pressing the keys.
FLAME SENSOR TYPE
- parameter not managed -
MENU
RepReSenTATiOn
SeTTABLe VALueS
MENU
PARAM
Burner type
2stages/3stages /modulating
Flame sensor type
not managed
Pre-heater management
ON / OFF
Post-ventilation time
0 - 255 s
First stage solenoid valve advance opening
0 - 80
Second stage solenoid valve advance opening
0 - 80
Third stage solenoid valve advance opening
0 - 80
Summary of Contents for LMB LO 300 2ST
Page 2: ...K d d D Z E Z E Y d s ZZK s Z s...
Page 43: ...43 IT...
