Lucid Series RF Signal Generator
Portable User Manual
Rev. 1.1
27
3
3.6
System Tab
The System Tab manages the setup parameters of the entire system. You can load a system file to use
a previously used system configuration.
Figure 3.11 System Tab
Following are the details of the System menu:
x
Serial
– the serial number of the generator.
x
Temp
– the temperature of the generator (
℃
).
x
Cal. Date
– the time stamp of the last calibration.
x
Option
s – the options available in this generator.
MOD
– Modulation package (AM, FM, PM).
PUS
– Pulse generator.
FS
– Fast switching.
LP
– Low Power (-90 dBc).
EMU
– Emulation, includes emulators for Keysight, R&S, Anapico, and Holzworth
PAT
– Pattern generator.
x
FW Ver.
– the firmware version.
x
HW Ver.
– the hardware version.
x
Ref. Osc.
– the clock to use for synchronizing system components.
Int. 10 MHz
– use an internal 10 MHz clock.
External
– use an external connected clock connected to the 10/100 MHz BNC connector on
the rear panel.