Lucid Series RF Signal Generator
Portable User Manual
Rev. 1.1
24
3
3.4
List Tab
The List tab enables you to create and generate a sequence of signals that can vary in frequency, power
and dwell time. You can also push the List button on the front panel to show the screen.
Figure 3.9 List
Define a patter according to the steps below.
1.
NEW
– Click the button to create a new list.
2.
LOAD
– Click the button to load a previously saved list.
3.
SAVE
– Click the button to save the list in a JSON (
JavaScript Object Notation)
format. You can
select to store the data on the SD card or on the internal.
4.
DEL
– Click the button to delete selected step.
5.
+STEP
– Click the button to add a new step. Enter the following parameters:
a.
Frequency (in Hz, kHz, MHz, or GHz) - sets the step frequency.
b.
Power (in dBm) – sets the step power.
c.
Dwell – sets the duration of the step (in μs, ms, or s).
d.
Adv. – Advance, toggle the values by pushing the Enter button:
i.
Run – the Dwell Time is followed by a Run to the next step
ii.
Wait – the Dwell Time is followed by a Wait for a Trigger that advances it to the next step.
6.
-STEP
– Click the button to delete selected line.
7.
SEND
– Click the button to upload the list to the instrument.
