Lamax Electronics S9 DUAL, User Manual

Page: 7 / 80

rEpositioNiNg thE viDEo imagE
›
Swipe your finger up or down the screen to adjust the vertical view of the video. This allows you to select
what part of the image you want to see on the screen without physically adjusting the direction of the
camera lens.
parkiNg CamEra
›
If you connect the red cable from the rear camera connection cable to the parking light, you activate the
parking camera. When reverse is selected, the rear camera image is automatically displayed, and the
parking lines appear.
rECommENDatioN: Install the red cable to the parking light at an authorized service centre.
6. sEttiNgs mENU
Touch the icon to display the settings menu.
wiFi off / on WiFI is used to connect the camera to the KaCam mobile
application. In the app, you can edit some of the settings of your
dashcam, control front and rear camera recording, and download
videos to your smartphone.
ADAS off / on Activates LDWS (Lane Departure Warning System) and FCWS
(Forward Collision Warning System). To avoid unnecessary
disturbance when driving in the city, it is only active at speeds
above 50 km/h. For proper functioning of ADAS, it is necessary to
calibrate it, see below.
Speed Cameras off / tone / voice Allows the reporting of stationary speed cameras from the
uploaded database. You can choose between audio or voice
notifications. The default voice alert is in English, on the product
page you can download it in Czech, Polish and German.
parking mode off / on If an impact is detected by the G-sensor, the camera automatica-
lly turns on and starts recording. After 30 seconds the recording
will be saved, protected and the camera will turn off again. When
parking mode is activated, the display is turned off so as not to
attract attention. The sensitivity setting of the G-sensor is the
same as when recording conventionally. Use the parking mode
function with the power supply disconnected!
video resolution FullhD 30 Fps /
hD 30 Fps
video time
(loop length)
1 min / 3 min /
5 min
Set the length of individual recordings. The camera shoots a
video loop of 1-5 minutes. If the memory card becomes full, the
camera starts overwriting the oldest recordings. Individual videos
follow on from each other smoothly.
g-sensor
sensitivity
off / low / medium
/ high
The G-sensor enables the camera to record an impact, for exam-
ple, in a car accident. As soon as the camera detects an impact, it
instantly protects the video currently being recorded from being
deleted.
volume off / low / medium
/ high
Adjusts the dashcam’s output volume (video playback, voice
instructions).
language English / Czech /
slovak / polish /
german / hungarian