background image

14

 

•  State of normal cooling
  When the cooking has finished, allow the cooker to cool down naturally and do not open the lid until the safety valve has dropped.
•  Open the pressure cooker
  Turn the handle in the arrow direction.

Some frequent problems:

Phase

Cause 

Remedy methods

The pressure regulator makes sound after 
heating for a while but no steam is escaping.

1.  The pressure regulator is blocked.
2.  Foods have remained inside the fan.
3.  Dry heating.
4.  The cooker is tilted.

1.  Remove the blocking substance.
2.  Remove with a needle.
3.  Shut off the flame, put the cooker in a flat position and 

allow the regulator to tilt to release the pressure; then 
open the lid and check.

4.  Place the cooker flat.

Steam is escaping from the safety valve.

1.  The fan opening is blocked.
2.  Too many foods inside.
3.  The flame is too strong.

1.  Remove the blocking substances.
2.  Remove the foods.
3.  Heat at a simmer, set the regulator and select 

appropriate pressure. 

Steam is escaping from the entire area.

1.  Fault has occurred in the regulator and the safety 

valve. 

2.  The gasket seal has been inserted incorrectly.
3.  The gasket seal has been damaged. 
4.  The gasket seal is dirty.
5.  The lid is not fully closed.

1.  Remove with a needle. 
2.  Put the gasket seal in a correct position.
3.  Replace the gasket seal with a new one.
4.  Clean the gasket seal.
5.  Close the lid properly.

MAIN TECHNICAL SPECIFICATION

•  Specification: operating pressure 100 kPa
•  Safety pressure: from 120 to 160 kPa.
•  Lid opening safety: If the pressure inside is greater than 4 kPa, the lid cannot be open.
•  Closed lid safety: if the lid is not correctly closed, the pressure inside is less than 4 kPa.
•  Second safety pressure: 300 Kpa

Cooking time

•  The cooking time starts when the pressure regulator is releasing steam normally.
•  The following list is for reference purposes only; please adjust the cooking time as needed.

REFERENCE LIST OF COOKING TIMES

Food name

Food + water amount After stabilizing the pressure regulator, small flame

Rice

1/3“

4-8 min

Oat mash

1/3“

8-12 min

Beef

1/2“

15-20 min

Corn

2/3“

5-8 min

Chicken

1/2“

10-15 min

Summary of Contents for NLP-DSS2240











Reviews: